JPC-7 DP PORTABLE SHORTWAVE ANTENNA

40m – 6m(7MHZ-50MHZ), 8 BANDS, 100W

Super portable antenna kit that can be set up within 5 mins/person – perfect for field operation.

• open the bag

• These are all the parts you can find in the kit

• Screw the 2 set of brass connectors into the antenna base. there are many slots on the antenna base that you can choose to mount in, in order to make the DP antenna to different angles

• Connect the tripod adapter to the antenna base → mount to tripod (doesn’t come with the antenna kit) → insert balun   ➜  

Note: Adapter details: small end 1 cm (fits standard tripod tops), large end 2 cm (connects to antenna base via custom 1/2″ BSP thread; standard M20 screws can also partially fit). Tripod interface: 1.6 cm top diameter – compatible with TP16′(4.8 METER) ANTENNA MAST

• assemble the aluminum arms and the whip antennas. for each side –
  • 2 aluminum arms -> coil -> whip antenna

            ➜  ➜ 

• put the antenna into the rotating arm kits

• connect the coaxial cable to the balun(coaxial cable does not come with the kit); check the vswr/ smith chart from a vna/antenna analyser.you are all set! let’s do some DXs!

SPECIFICATION

PART LIST

• 1 X ANTENNA BASE
• 1 X 1:1 CHOKE BALUN
• 2 X TELESCOPIC WHIP 2.5M
• 2 X MULTI-BAND COIL
• 4 X ALUMINUM ARM 19X320MM
• 2 X ROTATING ARM KIT
• 2 X BRASS CONNECTOR
• 1 X BALUN BANDAGE
• 1 X TRIPOD ADAPTOR
• 1 X PORTFOLIO BAG 37X23CM
• 1 X USER MANUAL